|
Easily applied, All
American will give brilliant long lasting gloss, extra toughness to resist
black heel marks and scuffing, prolonged wear in high traffic areas, and added chemical
resistance and flexibility.
Amazingly versatile, All
American will give excellent results on Resilient type floors, Terrazzo,
Marble Tile, Concrete, Sealed Wood, Cork, and nearly any other type of floor! It is the
perfect floor finish choice for offices, schools, churches, warehouses, shopping centers
and malls, hospitals, restaurants, etc.
As a base for future spray buffing, this finish is
unequaled, and is compatible with both water and solvent based spray buff systems. In
addition, this product will withstand repeated high speed burnishing and continue to yield
a glass like appearance time after time.
Meets or
exceeds U.L. and CSMA standards for slip resistance (ASTM-D-2047-69)
|
| Product Pricing |
All American - gallon
|
|
| Product Pricing |
All American - 5 gal pail
|
|
| |
|
|
Directions: Initial
Application: @2000 square ft. per gal.
For best results, initial application should be
made on a dry floor that has been thoroughly stripped and well rinsed. Apply 3-5 even
coats of finish with a high quality string mop or wax applicator, which has been rinsed in
clean water and wrung nearly dry. Allow 15-25 minutes drying time between coats, depending
on temperature and humidity conditions. Never contaminate finish mops or applicators with
cleaners or strippers! !
On exceptionally worn, porous, or old floors,
subsequent coats of All American may be required.
|
|
|
|
Maintenance:
Damp mop or sweep daily, or as frequently as
necessary to keep floor surface clean and free of dust, dirt and extraneous matter. When
mopping, use a neutral free rinsing detergent. Where heavy traffic has abraded finish and
reduced luster, a very thin coat can be used to restore gloss and give added protection.
Spray Buffing:
This finish provides an excellent base for
spray
buffing. Spray buffing will enhance
gloss and keep the floor looking its best.
Burnishing:
This product will withstand repeated
high speed
burnishing and give a glass like
appearance time after time.
Stripping:
Due to the unique formulation of this finish it is recommended that a concentrated
floor finish stripper such as "Pour-N-Peel" be
used to remove this product.
|
