Now formulated to meet the stringent Carpet & Rug Institute's Seal of Approval for overall cleaning effectiveness, rate of resoiling, pH, surface texture change and colorfastness.
Uses: Recommended for use with steam or hot water extraction equipment on all types of carpeting (Including Stain Resistant), upholstery and rugs.
This more environmentally responsible, anti-soil, multi-purpose carpet cleaner concentrate is a pre-treat and extraction cleaner. Powerful, cleaning agents penetrates and lifts soils.
Fiber All Plus is nontoxic, non-corrosive, contains no butyl, EDTA, phosphates, optical brighteners or volatile organic compounds (VOCs) as defined by state and Federal regulations.
- Powerful - Surfactant blend unlocks soil and dirt for easy removal.
- Low residue - Rinses freely, so carpets stay cleaner, longer.
- Economical - highly concentrated.
- Highly concentrated emulsifier for use with hot & cold water extraction or steam cleaning machines.
- Carpet & Rug Institute Seal of Approval and EcoLogo Certified
CRI Seal of Approval
This Carpet & Rug Institute tested and certified cleaner effectively removes soil without any damage to the carpet. The CRI Seal of Approval is awarded to carpet cleaning products that pass stringent
tests administered by an independent, accredited institute.
EcoLogo is North America's largest, most respected environmental standard and certification mark. EcoLogo provides customers - public, corporate and consumer - with assurance that the
products and services bearing the logo meet stringent standards of
Directions For Use:
Vacuum carpet thoroughly. Pre-test carpet for colorfastness in an out-of-sight area.
Extraction: For light soil: Dilute 1:128 (1 ounce per gallon of water). For heavy soil: Dilute 1:64 (2 ounces per gallon). For best results, follow with Carpet Rinse Plus to neutralize and condition the carpet.
Pre-Spray: For light soil: Dilute 1:128 (1 ounce per gallon of water). For heavy soil: Dilute 1:64 (2 ounces per gallon). Spray diluted product onto the carpet. Allow 3-5 minutes dwell time. Rinse with Carpet Rinse Plus to remove soil, neutralize and condition the carpet.
**Important Notes: Follow the cleaning procedures specified by manufacturer of the cleaning equipment. Avoid overwetting the carpet. Add Liquid Defoamer to the recovery tank as necessary. After using this product, set the carpet pile and protect the carpet from furniture legs and bases while drying.
**Do Not Over Wet Carpet**
To thoroughly clean heavily soiled carpets, pre-spray with Pre-Treat Plus cleaner. Safe to use on new stain resistant carpet fibers.
Fiber all is packaged in one gallon containers or four gallons per case if ordered by the case.
"Fiber All" Extraction Cleaner
Odor: Pleascent fresh
pH: 9.0 (concentrate)
Viscosity: Water thin
Base: Biodegradable detergents
Solubility: Complete with water
Soil Retardency: Excellent
Stability: 2 years
Product Code: 0043101