First Method:
Most carpet manufacturers cleaning recommendations state that the carpet
should be sprayed using a Pre-Spray & Traffic Lane Cleaner, or an
extraction product on the carpet, allowing the chemical to dwell for 3-5
minutes to emulsify the greasy soil and dirt. Then follow up by diluting
Rinse & Neutralizer in the water tank of your carpet extractor at 2-3
oz. per gallon of water. Extract carpets as you would normally clean.
Second Method:
Dilute Rinse & Neutralizer in a sprayer at a 2-3 oz. per gallon ratio
and lightly mist over the previously cleaned carpet, allowing to dry
simultaneously.
Third Method:
To remove chemical build-up on extremely soiled carpets, dilute Rinse &
Neutralizer in a carpet extractor at 2-3 oz. per gallon of water, and
rinse the carpet before extraction, shampooing or bonnet buffing. Always
test an inconspicuous area to determine colorfastness.
Feature Benefit: By using the Rinse &
Neutralizer through the extraction machine, it prevents the jets from
clogging which could cause streaking during extraction.
|
