A unique finishing system specifically designed for marble, granite, terrazzo and other stone floors, the
Cimex Diamond Finishing Machine allows successive stages of stone floor surfaces to be
completed more rapidly and with less effort than conventional methods.
The Cimex Diamond Finisher is a heavy duty stone and
concrete refinishing machine. The unique patented three head planetary
drive on our Diamond Finishing machines allow for aggressive grinding
and re-polishing of all types of stone and concrete flooring. The action
that is attained by the planetary motion levels high spots, eliminates
lippage and produces a flat surface that is ideal for refinishing back
to a high polish using the same machine.
The machine is portable, fitting through most doorways
and available in 110 volt, 15 amp, making it ideal for all types of jobs.
Even Finish: Special design maintains even pressure, avoids cutting & rotational scoring.
Less Operator Fatigue: Unique counter-rotating system eliminates pulling action to reduce stress on operator, resulting in greater
productivity and reduced labor costs.
Simple to Use: Unskilled personnel, even without previous experience, can produce professional results.
Cimex R48-DF -
19" Diamond Finishing Machine includes (1) 35 lb. weight plate &
velcro face pad drivers (set of 3).
Order #1060948
R48-DF 19" Diamond Finisher
Add/Qty
Price
Pack
Unit
For sale only in the United
States, not available for export to Canada & Mexico.
A unique feature of Cimex Rotary Cleaning Machines is the patented
three-head mechanism, incorporating a counter rotating planetary system which not only ensures
a more thorough cleaning action, but also allows greater operational control with a torqueless
action.
This three-head system makes the operator's task much easier as
it eliminates the tendency to "slide" which can be encountered with a single brush machine.
This system also prevents uneven wear.
The
Cimex reverses with
each power switch rotation... bristles
Re-Set and sharpen giving prolonged effective life.
Special Features:
Specially designed for marble, granite, terrazzo and other stone floors
Interchangeable Diamond finishing discs can be fitted to accommodate various stages of floor surfacing
Tilting head permits fast, easy pad/disk changes
Dead Man's Switch as Standard: Increases operator safety
6.5 gallon solution tank
Non-Clog Solution Valve: Even flow of solution fed through center of each brush for more effective distribution
1.5" Built-in vacuum port
(1) 35lb weight plate included - additional weights
are available
Diamond Polishing Discs
Vitro Diamond Discs may be used under a variety
of floor machines, including single disc as well as multiple head
and automatic scrubbers.
They perform well
on a variety of hard surfaces including marble, terrazzo, limestone
and concrete, leaving a flat, highly polished surface.
Vitro Diamonds are of the latest
technology. These resin bonded diamond abrasives can be used wet
or dry and come in the following sequence: 00, 0, 1, 2, 3, 4
& 5.
If the floor does not need to be cut
deep then you can start with either #1 or #2. Then all you have is
three or four steps and you are finished.
#1 cuts as aggressive as 30g resin but leaves
a 50g finish
#2 cuts as aggressive as 120g resin but leaves
a 220g finish
#3 cuts as aggressive as 400g resin but
leaves an 800g finish
#4 polishes to a 1800g finish
#5 polishes to a 3500g finish
3" Velcro Backed
Vitro Cuts may be used on: marble, terrazzo,
granite & concrete
Average life of the Vitro Diamond
discs varies from 3,000-5,000 sq ft. depending on floor condition
and density. The yield on diamond discs when polishing Concrete and
Terrazzo may be slightly less if used dry.
Lippage Removal Discs: 3" Diamond discs are used to
remove lippage from marble floors.
For
extreme lippage removal start with a 50 grit metal
bond disc then follow it with a #00 resin bond diamond
disc as described below.
The 00
cuts as aggressive as a 50 grit metal bond diamond abrasive;
however, it leaves a smooth scratch pattern since it is resin
bonded. The 0 cuts as aggressive as a 100 grit metal bond diamond
abrasive, also leaving the smooth resin scratch pattern. This
eliminates the old problem of trying to remove the deep scratches
left behind by expensive metal diamonds.
*Lippage removal pictured on the right on the right are
a Metal Bond. 00 & 0 are resin bond shown above right.
User Benefits
Performance Features
Long life
Works well on black and green marble
Velcro backed
Color coded
Economically priced
Rigid design leaves floor flat
Eliminates the need for polishing compounds
on some hard to polish marbles
For use on the Following Equipment:
V-Max, Mighty Max, Cimex & Many Manufacturer's Floor Machines
Always test each surface for suitable results prior
to beginning complete projects. Marbles such as blacks and greens
are more difficult to polish.
Diamond Polishing Discs
3" Diamond Disc
for floor use
Required for V-Max
Required for Cimex
For Pricing click
"add to cart"
4" Diamond Disc
for hand grinder
For Pricing click
"add to cart"
#1 (30-50 grit)
5
9
#1 (30-50 grit)
#2 (120-220 grit)
5
9
#2 (120-220 grit)
#3 (400-800 grit)
5
9
#3 (400-800 grit)
#4 (1000-1800 grit)
5
9
#4 (1800 grit)
#5 (3500 grit)
5
9
#5 (3500 grit)
Lippage Removal Discs
Description
Required for V-Max
Required for Cimex
For Pricing click
"add to cart"
4" Diamond Disc
for hand grinder
For Pricing click
"add to cart"
50 Grit Metal Bond
3 or 5
9
For Extreme Lippage removal start with a 50 grit metal bond
and move to a "00"
#00 Lite Lippage Removal
(50 grit equivalent)
3 or 5
9
#00 Lite Lippage Removal
(50 grit equivalent)
#0 Lite Lippage Removal
(100 grit equivalent)
3 or 5
9
#0 Lite Lippage Removal
(100 grit equivalent)
Diamond Discs & Lippage Removal are NOT Returnable
