|
Heavy Duty Industrial Degreaser
2nd Industrial Degreaser
is a versatile heavy duty degreaser meant for tough
industrial cleaning jobs. It emulsifies greasy, oily soil for
easy and complete removal. A special low foam
formulation makes this water based
cleaner/degreaser ideal for use in automatic floor
scrubbing machines. It eliminates costly work stoppages due to
foam build-up in the recovery tank.
This product is economical and versatile.
Its varied dilution ratios enable use in a wide
range of applications, from heavy duty
degreasing to general purpose cleaning. When
used in pressure sprayers, it generates cleaning
power without over abundant suds.
Spontaneously emulsifies oily soil -
Works fast; effective in auto scrubbers and
pressure washers.
- Contains No solvents - Safer for workers and the
environment.
- Contains corrosion inhibitors - Safe on most industrial surfaces.
|
 |
| Order #0020101 |
| 2nd Shift Degreaser
|
|
|
2nd Shift Degreaser
Specifications |
| Physical State: |
Liquid |
| Color: |
Clear |
| Fragrance: |
None |
| Foaming: |
Low |
| Free Rinsing: |
Yes |
| Petroleum Distillates: |
None |
| Viscosity: |
Thin |
| Phosphates: |
None |
| Biodegradable: |
Yes |
| pH (undiluted): |
12.8 |
|
|
Packaging: One gallon containers or
four gallons per case if ordered by the case.
Areas of Use: |
|
- Emulsifying degreaser for heavy duty maintenance.
Non-butyl emulsifier is concentrated for fast action in the toughest
oily and greasy soils.
- Emulsifies oily soils on industrial equipment, parts, soak tanks,
tools and engines.
- Excellent for food service filters, fans, vent hoods, grills, ovens and
other surfaces.
- General cleaner for floors and counters.
|
|
Directions: |
Heavy Soil: 1:16
to 1:8 (8-16 ounces of per gal. of water)
Normal Soil: 1:32 to 1:16 (4-8 ounces of per gal. of water)
Light Soil: 1:64 to 1:32 (2-4 ounces of per gal. of water) |
Pressure Cleaning Equipment:
Use 2ND SHIFT in the equipment in accordance with the equipment
manufacturer's instructions. Adjust use dilution strength for optimum
cleaning. Rinse with hot or cold clean water. |
Floor Cleaning:
Add 2ND SHIFT to the cleaning solution tank after filling it with water.
Adjust use dilution strength to optimize cleaning results and
efficiency. |
Mopping Equipment:
Dilute between 1:50 and 1:5 (2-25 ounces per gallon of water). Prepare
use
dilution based on the amount and type of soil to be cleaned. Apply to
floor, allow to work, and agitate with mop or brush, pick up and rinse
if needed.
|
