|
Floor Finish Applicator
Micro-Mop Floor Finish Applicator -
primarily designed for high efficiency floor care
finishing/detailing and is the perfect applicator
for small to mid size areas of flooring.
The control button to dispense finish is on the tip of the
handle.
The easy to change 50 oz. reservoir will cover
approximately 900–1000 square feet in 15 minutes.
Very easy clean-up - flush reservoir with hot water for
3–5 minutes. Solidified finish can be removed without tools, along with the
valve, and replaced at minimal cost. No leakage occurs during transport with
an air-tight valve that seals the tank.
- Lightweight design - weighs less than 3 pounds (empty)
- Frame size: 16" x 5" wide
- 50 ounce capacity, enough to cover 900 sq. ft per fill
- Accepts 18" MicroFiber pads
- Easy to fill
- Easy to use
- Eliminates baseboard splash
- System applies finish directly onto floor from tank
Perfect for use in: classrooms, patient rooms, convenient stores, offices, waiting rooms, check-out isles.
Simply unscrew the fill cap and add the desired amount of finish, replace the cap, depress the
thumb button control valve to dispense the finish to floor.
|
Not for use with oil base
floor/wood finishes.
|
|
Applicator pad is not included,
please order separately.
|
 |
Wet the applicator head with the finish and pull the
Micro-Mop for a perfect razor sharp coat, simple, clean and fast.
Floor Finish Applicator Pad: This 5" wide x 17"
long microfiber applicator pad is designed to apply floor finish. The foam
core holds more finish applies a perfect coat, every time.
Packed is a re-sealable poly bag for re-use and storage.
Packaging: Sold each or 12 per case if ordering a case. |
