A high quality dust mop treatment which attracts and holds dust to the dust mops.
Lifts dust quickly and completely from all surfaces.
Formulated to attract dust to mops and cloths which have been lightly sprayed, this product picks up and holds dust like a
magnet.
Dust Mop Treatment is ideal for maintaining all types of flooring: wood, vinyl, terrazzo, concrete, quarry tile, and synthetic sports floors.
Parish Dust Mop Treatment is
specially formulated to meet EPA-VOC requirements as a dusting aid
without sacrificing cleaning and protective properties.
Low evaporation rate, makes it
very economical to use. It is the most effective treatment made,
adding dust control to any dust mopping program.
Daily dust mopping with this product will increase the life and beauty of
floors by reducing the abrasive effects of tracked in dirt. Ideal for
removing black rubber heel marks. Treated mops last longer and work better
than mops treated with any other formula.
*Packaged in treated plastic
containers.
* not recommended for use on water based wood floor finishes. We
suggest the water based
treatment.
How to properly treat a cotton dust
mop with Dust Mop Treatment
Place paper or similar on
floor surface to prevent staining of floor.
Place the dust mop on the paper
with the fibers of the facing down.
Determine the correct amount of
treatment needed, start by measuring the length of the mop and
calculate the amount of dust mop treatment necessary. The amount of
treatment for a cotton dust is 2 ounces per foot.
Pour the proper amount of Dust
Mop treatment into a measuring cup and pour directly thorough the
backing of the mop.
Example:
A 24" dust mop requires 4 ounces of treatment.
A 36" dust mop requires 6 ounces of treatment.
Pour the dust mop treatment
trough the backing of the mop (as evenly as possible) and
roll the mop up. Place the mop into a plastic bag for 24-48 hours
(this allows the treatment to wick and work its way through the
cotton fibers).
Remove the dust mop from the
bag and place the proper size frame and begin using.
Re-Treating
For retreating dust mops, apply one ounce of dust
mop treatment per foot. In other words, for retreating a three foot
dust mop, it would only take three ounces of Dust Mop Treatment.
The easy method for re-treating
is to apply the mop treatment with a trigger sprayer and 16-32 ounce
spray bottle. Apply the treatment directly
to the mop fibers the day before
you plan on using the mop. This prevents any oil residue from the
mop fibers transferring to the floor and creating a slip hazard.
For daily care, dirt
and dust can easily be removed from treated mop by vigorously shaking
, brushing or vacuuming.
Key Points:
Apply the dust mop treatment
thorough the backing of the mop at a rate of 2 ounces per
foot for the initial treatment and 1 ounce for re-treatment.
