|
Spray Dust Mop Treatment (aerosol)
Aerosol Dust Mop Treatment when used on
dust mops, replaces sweeping compounds and eliminates the dust created
when using push brooms. Dust Mop Treatment does not make the treated
surface slippery and will not damage floor surfaces when used as
directed. Dust Mop Treatment should be used whenever surfaces such as
asphalt tile, linoleum, vinyl, asbestos, rubber tile, marble, ceramic,
concrete, quarry tile, magnesite, cork and wood are dusted. Cleaning
cloths treated with this product will clean and polish plastic, Formica
surfaces and chalkboards. Dust and dirt is not just pushed
around but is held in the mop or cloth until a gentle shake releases it
in the disposal area.
Packaging: Cans sold
individually or 12 cans per case if ordering a case.
|
 |
| Order #0100818 |
| Dust Mop Treatment
|
|
|
Dust Mop Treatment
Specifications |
| Wt./ 20 oz. can: |
18 Ounces |
| General Appearance: |
White Creamy Spray |
| Odor: |
Pine |
| Color: |
White |
| Spray Pattern: |
Wide Oval |
| Glycol Ether Content: |
None |
| % VOC By Weight: |
24.9 |
| Classification: |
Aerosol Dust Mop Treatment |
| pH: |
7.0 |
| Vapor Pressure At 70F: |
40 psig |
| Flammability: |
Non Flammable per CPSC
Flame Projection Test |
| NFPA Code 30B: |
Level 2 |
|
|
Directions:
Dust Mops: Spray dust mop until
moist, never wet. Do not spray at the very ends. Shake mop vigorously to
release dust. Renew by spraying lightly in center of mop. When mop head
becomes excessively soiled, remove and wash in soapy solution, rinse and
dry.
Cloths: Spray dust cloth from about
6 inches by moving the spray rapidly across the cloth. Spray until
moist, not wet. Retreat cloth lightly as needed. When cloths become
dirty, they should be washed in soapy water, rinsed and dried. |
|
