Environmentally Safe Floor Stripper

Low Odor Floor Stripper A very low odor, non-toxic, non-corrosive, non-butyl floor seal and finish remover. Specially designed to remove new Zinc-Free Floor Finishes as well as conventional floor finishes. This fast-acting floor finish remover dissolves multiple coats of finish without harsh alkalis, butyl cellosolve, or strong ammonia odors. No neutralizing needed. Controlled foam and free-rinsing characteristics assure that no residue is left behind to interfere with subsequent finish applications.

Packaging: 2.5 gallon container

• Recycled label stock, bottles and cartons
• Containers have low energy requirements for recycling
• High concentration levels to reduce shipping energy
• Ergonomic 2.5 gallon containers utilize less plastic than 5 gallon pails and don't require cartons

2. Dilute Low Odor Floor Finish Remover from 1:4 to 1:8 with Cold water, depending on age and build-up of finish.

3. Apply liberally with a mop to an area small enough so as not to allow the product to dry. Be sure to completely cover floor to baseboards.

4. After 3 to 5 minutes, agitate the wet section with a mop or machine scrub. Pick up solution using a mop, wet vacuum or automatic scrubber.

5. Rinse thoroughly with clear water to remove residue as necessary.

*NOTE: Asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations with hot water. Always test floor before proceeding.

Elements Low Odor Floor Stripper
Specifications