The molded face plate has thousands of individual hooks that grip into a floor pad and hold it securely while operating. The solid block includes a built-in riser and showerfeed holes that allows water to flow through when using a solution tank. The Mighty Lok pad holder is generally sized one inch smaller than the actual size of your floor machine, this prevents the pad holder from scuffing walls and baseboards.
Features of the Mighty Lok:
- A showerfeed system with a smooth wall that delivers over 50% more solution to the floor.
- Water and chemical resistant engineered plastic block.
- TRU-FIT Universal Clutch Plate (NP-9200)
- Designed to flex vertically and compress horizontally to reduce machine wobble and operator fatigue.
The innovative Mighty-Lok pad driver offers a unique "all-in-one" construction for quick, adjustment-free installation and fast, effective driving action.
The revolutionary design includes universal NP-9200 clutch plate, built-in riser and a showerfeed system for a pad driver capable of handling the toughest jobs.
Fits most standard floor machines including:
Advance (new models), Betco, Clarke, EDIC, Eureka, Hawk, Hoover, Kent, Koblenz, Mastercraft, Minuteman, NSS, Nobles, Nusource, Pacific, PowrFlite, SSS, Tennant, Tornado, Viper, Windsor floor machines.
Mighty-Lok Pad Holder Specifications
A pad driver should be 1" smaller than the machine size. Therefore, a 20" floor machine would use an a 19" Mighty-Lok. This rule applies to over 99% of the applications.
Pad Holder Sizing
11" pad holder #1134011 fits a 13" floor machine (does not included a riser)
12" pad holder #1134012 fits a 14" floor machine (does not include a riser)
13" pad holder #1134013 fits a 14" floor machine
14" pad holder #1134014 fits a 15" floor machine
15" pad holder #1134015 fits a 16" floor machine
16" pad holder #1134016 fits a 17" floor machine
17" pad holder #1134017 fits a 18" floor machine
18" pad holder #1134018 fits a 19" floor machine
19" pad holder #1134019 fits a 20" floor machine
20" pad holder #1134020 fits a 21" floor machine
TIP: Never use a pad driver without a floor pad and replace pads on a regular basis. This will protect the pad driver material and ensure longer effective life.
The key to remember when ordering a pad holder is the block diameter in relationship to the machine size. A pad holder (block diameter) is sized 1 inch smaller than the machine size. Example: If you own a 17" floor machine (this is measured on the underside of the machine measuring from bumper to bumper) you would order a 16" pad holder. The sole reason to order the pad holder smaller is to protect the pad holder from damaging walls and fixtures.
The exception here is when ordering a pad holder for a 12" or 13" floor machine order pad holder 2" smaller, example: 13" floor machine would take an 11" holder.
As a general rule, order floor a pads the same size as your machine, this will protect both the pad holder from damaging edges & baseboards.
These pad holders are NON RETURNABLE, please call our office if you have any questions before ordering.