Water-Based Urethane Gym Floor Finish is a one-part water-based urethane/acrylic wood finish that provides long-lasting beauty and protection to all wood floors. There is no mixing of a catalyst. It lays down easily with an applicator, is re-coatable in about two hours and ready for traffic in 24 hours.

In addition to offering excellent black mark, spill and scuff resistance, this product is easily repairable with a high speed burnisher. Meets or exceeds all federal and state regulations for VOC content.

This product is a single component, water based acrylic wood floor finish that provides beauty and protection to all types of wood sports floors.

This finish is not designed for application to bare wood floors. Use only on previously sealed wood floor surfaces.

One gallon will cover approximately 250-275 square feet of flooring with two coats. Example, if your gym floor is 6000 square feet you would need to order 24 gallons of finish. This should provide you enough material to coat 6000 square feet with two coats.

Recommended Applicator: Synthetic Applicator

The major advantage of Full Court is "it's simple". Easy to apply and no mixing is required. Easily repaired with a high speed burnisher and a soft floor pad. If you desire a more resistant finish we suggest "Commercial" wood finish.