Gym and Wood Floor Finish

Urethane Gym Finish - VOC Compliant

Crystal Cote 350 Oil Modified Urethane wood floor finish is a VOC compliant  (348 grams/liter) solvent based, wood finish that provides a highly durable coating with extremely high gloss. It's very light color, enhances the beauty of the wood and minimizes oxidation and age discoloration. Easy to apply using a conventional lambswool applicator or the ultra-fast EZ Way applicator.

Coverage: 500 - 700 square foot per gallon

Crystal Cote 350 provides a chemical resistant, high gloss film that will repel scratching, scuffing and rubber burn marks. This product may be used on all wood floors including plank, ironbound and parquet types.

Crystal Cote 350 provides a hard, chemical resistant, high gloss film that will repel scratching, scuffing and rubber burn marks. It will also protect the wood from spills, moisture, rain, snow and ice trackage. This product may be used on all wood floors including plank, ironbound and parquet types.

ON NEWLY SEALED FLOORS: Buff with a #120 abrasive screen. Clean surface thoroughly with a tack rag and waterless cleaner and allow to dry. Apply finish using a synthetic or lamb's wool applicator, pressure sprayer or gravity fed applicator. If more than one coat is desired, allow 6 to 8 hours dry time between coats. No screening is required if recoating is done within 24 hours. Allow 72 hours cure time before allowing any foot traffic on floors (no dances or similar events for at least one week).

NOTE: Best results are obtained with adequate ventilation and floor temperature above 60°F and below 95°F. Avoid direct drafts on floor while finishing.

CAUTION: Do not use on any resilient type flooring.

• Superior Gloss

• Tough durable finish

• Easy maintenance

• Easy application

• Slip-Resistant

• Urethane Toughness

• Reflects natural color of wood
• Higher solids than water based urethanes
• MFMA Approved (Maple Floor Manufactures Association)
• VOC Complaint for ALL OTC complaint states, including all of NY