Ice Melt Remover is used to clean away ice melt chlorides, soap, and hard water films as well as other organic residues from floors. The unique formula has a neutral pH and contains multiple chelating agents and surfactants to remove salt residue, extending the life of the floor. Ice Melt Remover will give floors an immaculate appearance in some of the harshest environments and leaves virtually no residue on the floor.
Ice Melt Remover features:
- Dual performance - penetrates and neutralizes in one step.
- Neutral pH
- Pleasant aroma
- Excellent floor conditioner after strip outs.
- Won’t harm unfinished floors
- Leaves surfaces smelling clean
For use on these types of floors and surfaces:
Vinyl tile, concrete, linoleum, terrazzo, brick, ceramic, synthetic floors, snow blowers, vehicles, walls, baseboard, marble
Depending upon the flooring type and soil levels encountered, follow the directions as outlined below using warm or cold water:
For clean up of ice melt residues from hard surface flooring:
For light residue removal, dilute solution at 3 oz. per gallon of water. For heavy residue removal, dilute at 8 oz. per gallon. Damp mop floor in usual manner and let stand for 5 to 8 minutes. Scrub or agitate as required using a mop, automatic scrubber or single disc floor machine. Pick-up the solution with mop and bucket or wet vacuum.
For concrete, brick, terrazzo floors:
Dilute 8 oz. of concentrate per gallon of water. Damp mop floor in usual manner and let stand for 3 to 5 minutes. Scrub or agitate as required using a mop, automatic scrubber or single disc floor machine. Pick-up the solution with mop and bucket or wet vacuum.
For spray and wipe applications:
Dilute 1 to 1 with water. Spray on ice melt residue and let stand for 3 minutes. Use a clean microfiber cloth to wipe clean. Rinse with water.
Ice Melt Remover is packaged in gallon containers or four gallons per case if ordered by the case.
Ice Melt Remover Specifications
Physical state: Liquid
Fragrance: Winter spice
pH (concentrate): 8.5 - 9.5
pH (Diluted): 7.5 - 8.5
Recommended dilution: 1:42 (3 oz. per gallon)
Viscosity: Water thin
Solubility: Complete with water
Flash point: None
Storage / Stability: 1 year
Weight per gallon: 8.96 lbs/gal.
Freeze / Thaw stability: Keep from freezing
"Ice Melt Remover made my floors look absolutely beautiful! We were struggling to find a solution to remove the ice melt residue as we had tried several products already, none of which worked well."