| |
Carpet and Fabric Protector |
| Coats and protects carpet fibers from becoming soiled and stained
from daily wear and spills. Carpet will stay cleaner longer and clean
easier. Increases vacuum efficiency. Dries quickly and leaves no odor.
Convenient, ready to use formulation.
Conventional cleaning methods begin to
remove the stain protection from carpet fibers after 2 to 3 cleanings.
Carpet Protector contains DuPont Zonyl Soil and
Stain Protector that restores stain resistant properties originally
manufactured into the carpet.
- Extends Time Between Cleanings
- Improves Vacuum Cleaner Efficiency
- Contains DuPont Zonyl Soil & Stain Protector
Major carpet manufacturers recommend
after every second or third cleaning to reapply carpet & fabric
protector.
This product is designed as a
topical treatment to replace or renew the original carpet manufacturers
soil-retarding feature.
Packaging: One gallon
containers or four gallons per case if ordered by the case. |
 |
|
|
| Carpet Protector (gallon)
|
|
|
For Use On: Carpets, Rugs, Mats, Fabrics & Upholstery
|
|
Directions For Use:
This product is applied
after a carpet has been properly cleaned. It is put on by spray
application, dries quickly, and leaves no odor. Carpet should be
thoroughly cleaned before treatment. For best
results, apply after extraction cleaning on damp carpet.
Shake well before using. |
|
Coverage:
Damp, Clean Carpet: 600-800 square feet per gallon
Dry Carpet: 300-400 square feet per gallon
Holding the spray nozzle 12 to 18
inches from the carpet, apply half the solution
over the entire carpet area, spraying in a left
to right direction. Then apply the other half over the
entire carpet area by spraying in a top to bottom direction.
Maintain a light, uniform spray pattern for even coverage.
Allow carpet to dry before use. |
