|
Ice Melt Remover
The new Ice Melt Remover is used to clean away ice
melt chlorides, soap and hard water films and other organic residues
from floors. The unique formula is neutral pH and contains
multiple chelating agents and surfactants to remove salt residue,
extending the life of the floor. Ice Melt Remover will give
floors an immaculate appearance in some of the harshest environments.
An all-purpose cleaner used to condition floors and
remove ice melt residue, hard-water build-up, and soap haze from all
surfaces. Designed to dissolve all ice melt chlorides, soap and hard
water films as well as scum, scale, and other organic residues. When
used as directed, it will not harm any surface not affected by water.
Highly concentrated and economical to use.
For removal of ice melt residue on:
Vinyl Tile, Concrete, Linoleum, Terrazzo, Brick, Ceramic, Synthetic
Floors, Snow Blowers, Vehicles, Tire Chains, Walls, Baseboard |
 |
Depending upon the flooring type and soil levels
encountered, follow the directions as outlined below using warm water:
For clean up of ice melt residues from hard
surface flooring: For light residue removal, dilute solution at 3
oz. per gallon of water. For heavy residue removal, dilute at 8 oz.
per gallon. Damp mop floor in usual manner and let stand for 5 to 8
minutes. Scrub or agitate as required using a mop, automatic
scrubber or single disc floor machine. Pick-up the solution with mop
and bucket or wet vacuum.
For Concrete, brick, terrazzo floors: Dilute 8 oz.
of concentrate per gallon of water. Damp mop floor in usual manner
and let stand for 5 to 8 minutes. Scrub or agitate as required using
a mop, automatic scrubber or single disc floor machine. Pick-up the
solution with mop and bucket or wet vacuum.
For spray and wipe applications: Dilute 1 to 1
with water. Spray on ice melt residue and let stand for 3 minutes.
Use a clean microfiber cloth to wipe clean. Rinse with water.
|
