Soap Scum Remover

Bul-It Non-Acid Soap Scum and Tile Cleaner

An all purpose Soap Scum Remover and hard surface cleaner containing no acids or abrasives. Designed to dissolve soap scum and hard water films as well as scum, scale, and other organic residues. When used as directed, it will not harm any surface not affected by water. Highly concentrated and economical to use. Non-fuming, non-acid, non-toxic.

For Use On:

• Floors
• Walls
• Sinks
• Urinals
• Kitchens
• Toilets Fountains
• Tile
• Grout
• Shower Stalls Countertops
• Swimming Pools Chrome

FOR USE ON CHROME, STAINLESS, PORCELAIN, CERAMIC TILE, FIBERGLASS, CONCRETE, TERRAZZO, RESILIENT TILE, ETC.: DILUTE ACCORDINGLY:

Light Cleaning — 1:40 ratio (3 oz. Per gallon of water)
General Cleaning – 1:30 ration (4 oz. Per gallon of water)
Heavy-duty Cleaning – 1:20 ration (6 oz. Per gallon of water)

These directions are flexible rather than specific. In many cases a more dilute solution can be used, while for extreme conditions a less dilute solution may be used. Apply solution freely to the surface with clean sponge, mop, or sprayer. Allow solution to stand at least 5 minutes or more depending on soil condition. After soil is loosened, wipe or pick-up solution and rinse with clean water. For heavier soil conditions agitate with a scrub brush or floor machine to hasten and improve cleaning time and performance.