The non-ammoniated formula contains no harsh caustics and does not leave behind harsh alkaline residues. No residue prevents finish application problems from improper rinse procedures. ONYX is designed to be effective as a "No Scrub" floor stripper. It uses a concentrated solvent system that re-dissolves the floor finish, rather than an alkaline system that breaks the finish loose from the floor. The dissolved finish stays liquefied, reducing "pad clogging" when used in a scrub application.
- No harsh caustics make it more user friendly
- Fast acting - saves time and labor
- High active formulation - effective on heavy buildup
ONYX is an aggressive fast acting floor stripper designed for the removal of water based floor coatings. The concentrated solvent and surfactant formulation re-emulsifies floor coatings rapid removal. This non-ammoniated formulation quickly removes finish without the offensive odor of ammonia. ONYX saves time and labor when tackling difficult stripping jobs.
Wear safety equipment recommended on MSDS, place Wet Floor Signs and read all directions and cautions prior to beginning your work.
See Label For Dilution Instructions
- Dilute from 1:3 through 1:14 (10 oz. - 32 oz. per gallon)
with COLD WATER.
- Apply solution at rate of 150-300 square feet per gallon.
Apply enough solution to ensure complete wetting. Re-wet floor if necessary.
- Allow to work for 5-10 minutes. DO NOT ALLOW SOLUTION TO DRY.
Apply more solution if needed.
- If machine stripping scrub the floor with a PT-2000 High
Performance Stripping Pad or equivalent.
- Pick up solution with a wet vacuum, auto scrubber or mop and bucket.
Change water often when using a mop & bucket for pick up.
Onyx is packaged in one gallon containers or four gallons per case if ordered by the case.
ONYX Heavy Duty Floor Stripper Specifications
Physical State: Liquid
pH: 11.5 – 12.5
Ammonia Content: None
Viscosity: Water thin
Water Based: Yes
Emulsifier: Extra heavy duty
Phosphate Content: None
Solubility: Complete with water
Flashpoint: 145° F (TCC)
Storage / Stability: 2 years
Weight Per Gallon: 8.27 lbs./gal.
Freeze / Thaw Stability: Keep from freezing
ONYX is a powerful water-based compound for quickly and efficiently removing traditional floor finishes. This product typically will accomplish in one application what many finish removers do in two or three, saving hours of labor.
Economical: ONYX Floor Stripper is highly concentrated and is formulated to be diluted. Easily achieve equivalent removability as a conventional floor stripper with half the amount of ONYX.