Tracker 3000 dual head floor stripping machine aggressively scrubs, strips, and screens floors in one pass. Two counter rotating 16" brushes effortlessly strip a 30" path. Powered by a powerful EPA & CARB certified Kawasaki 18 hp engine. Run time is 5-6 hours.
The Tracker makes it easy - The Tracker 3000 stripping machine makes the most dreaded floor stripping operation as simple a child's play.
Ease of operation - Brush propelled and easy to maneuver, this 30" wide stripping machine covers 20,000 square feet of floor space per hour with amazing efficiency. Its 900 rpm brush speed and counter rotating dual-brush offer flawless results.
Tracker 3000 Deep strips/scrubs in a 30" path with two 16" counter rotating brushes removing multiple layers of floor finish easily with its propane powered engine. Run time is 5 to 6 hours per propane cylinder.
- Unique scouring action
- Two 16" heavy duty stripping brushes
- Heavy brush pressure (350 lbs.)
- Foam filled tires
- No side torque
- Low profile 4" deck
- EPA & CARB approved
Parish-Supply.com - The janitorial supply company customers trust.
30" Propane Floor Stripper Specifications
All machines come standard with hour meter, (2) 16” stripping brushes, floating skirt,
detachable transport wheel, steel safety-fill fuel cylinder with overfill prevention device (OPD), Safety Kill Switch, Emissions shut-down system and two year warranty.
20,000 sq. ft. per hour
(2) 16 in. grit brushes
Gear drive with (2) 16" counter rotating brushes
All steel fabricated frame, Powder coat finish
450 pounds w/ propane tank
Engine System - Kawasaki 18 hp (twin) FS481V (new generation)
- Overhead V-valve
- 90° V-twin
- High performance pressurized lubrication
- Electronic spark ignition
- Automatic compression release
- Dual element air filter
- 12 volt starting system
- Low oil pressure switch
- Catalytic muffler
12 volt with on-board battery
Cartridge type full flow
Low Oil Alarm:
Low pressure shutdown
Two year limited warranty