|
 |
| |
Cleaning Equipment |
 |
|
|
|
|
|
|
|
|
|
| |
|
Propane Powered Floor Stripper |
|
Tracker 3000
dual head floor stripping machine aggressively scrubs, strips, and
screens floors in one pass. Two counter rotating 16" brushes
effortlessly strip a 30" path. Powered by a powerful EPA & CARB
certified Kawasaki 18hp engine. Run time is 5-6 hours. |
|
Make large floor
stripping effortless with the double-brush Tracker
3000 propane powered floor stripper. It's 30" stripping path lets you cover up
to 20,000 square feet per hour.
Tracker 3000 high production floor stripping machine strips or scrubs in
a 30" path with two 16" counter rotating brushes, removing multiple
layers of floor finish easily with its propane powered engine. No need
for high voltage electric cords. |
 |
|
The Tracker makes it easy.
The Tracker 3000 stripping machine makes the most dreaded floor stripping operation as
simple a child's play. |
| Order #1506230 |
| Tracker 3000 w/ 18 Kawasaki
|
|
|
Ease of operation
Brush propelled and easy to
maneuver, this 30" wide stripping machine covers 20,000 square feet
of floor space per hour with amazing efficiency. Its 900 rpm brush speed
and counter rotating dual-brush offer flawless results.
Tracker 3000 Deep strips/scrubs in a 30" path with two 16" counter rotating brushes
removing multiple layers of floor finish easily with its propane powered
engine. Run time is 5 to 6 hours per propane cylinder.
|
|
|
Call 800-836-0862 to order |
|
|
*Shipping
rates range from $225.00 - $350.00
depending on final destination.
Residential deliveries may incur an additional
charge of $30.00 - $50.00
|
|
|
| |
|
|
 |
30"
Propane Floor Stripper
Specifications |
All machines come standard with hour meter, (2) 16”
stripping brushes, floating skirt,
detachable transport wheel, steel safety-fill fuel cylinder with overfill
prevention device (OPD),
Safety Kill Switch, Emissions shut-down system
and two year warranty. |
| Production Rate: |
20,000 sq. ft. per hour |
| Cleaning Path: |
30 in. |
| Brush Size: |
(2) 16 in. grit brushes |
| Brush System: |
Gear drive with (2) 16" counter rotating brushes |
| Brush Pressure: |
350 lbs |
| Brush Speed: |
320 RPM |
| Clutch System: |
Centrifugal clutch |
| Chassis Construction: |
All steel fabricated frame, Powder coat finish |
| Width: |
30.5 in. |
| Length: |
53 in. |
| Height: |
42 in. |
| Weight: |
450 pounds w/ propane tank |
| Warranty: |
2 years |
|
|
Engine
System - Kawasaki 18 hp (twin)
FS481V (new generation)
|
|
 |
- Overhead V-valve
- 90° V-twin
- High performance pressurized lubrication
- Electronic spark ignition
- Automatic compression release
- Internally vented carburetor
- Dual element air filter
- 12 volt starting system
- Low oil pressure switch
- Catalytic muffler
|
| Horsepower: |
18 horsepower |
| Cylinders: |
two |
|
Displacement: |
603 cc |
| Fuel System: |
Propane |
| Sound Level: |
87 dBA |
|
Valve Arrangement: |
Overhead |
| Starter: |
12 volt with on-board battery |
|
Oil Filter: |
Cartridge type full flow |
|
Low Oil Alarm: |
Low pressure shutdown |
| Catalytic Muffler: |
Low Emissions |
| CO Emissions: |
0-3PPM |
| Engine Warranty: |
Two year limited warranty |
|
|
|
|
|
|
