Powerful, non-fuming Rejuvenator Grout Restorer makes ceramic tile & grout look like new. Removes hard water scale, soap scum, grout haze, and rust. Rejuvenator tile and grout cleaner will restore the look and beauty to grouted floors. Rejuvenator is used when all other cleaners have failed and is a safer alternative than aggressive acids like phosphoric and muriatic. Rejuvenator is a restorative tile and grout cleaner that will readily remove the embedded soil layer thereby renewing the surface of the grout.
Rejuvenator heavy duty tile and grout cleaner will etch most polished marble, travertine, limestone, and other acid-sensitive surfaces. Will not etch or corrode MOST metal surfaces, but use with caution around metals and tape off all metals that may be contacted with Rejuvenator. Formulated with advanced cleaning technology that breaks down even the toughest stains.
- Fast acting
- Easy to use
For use on:
- Ceramic tile
- Porcelain tile
- Sanded grout
- Quarry tile
Floor must be clean of all loose dirt and debris. Old acrylic floor finish and heavy dirt build up should be removed with conventional stripper, degreaser, or general purpose cleaner.
Heavy duty cleaning and restoration: 1 part to 2 part water
Medium duty cleaning: 1 part to 4 parts water
Light duty cleaning: 1 part to 10 parts water
1. Apply diluted Rejuvenator Tile and Grout Restorer to the floor
with a clean mop.
2. Leave floor wet for five minutes.
3. Agitate cleaning solution using a low speed floor machine equipped with a nylon brush. Solution can also be agitated by hand with a deck brush.
4. Recover dirty solution with a wet dry vac.
5. Rinse floor with clean water using a clean mop and wet dry vac.
6. Allow floor to dry (use of an air mover is highly recommended when drying a floor)
*Do not use this product on marble, limestone, terrazzo and travertine surfaces. Do not use on soft metals such as aluminum and galvanized surfaces as irreversible damage may occur. If contact should occur, flush with water immediately.
Rejuvenator is packaged in one gallon containers or four gallons per case.
Rejuvenator Tile and Grout Restorer Specifications
Physical state: Liquid
Base: Urea acid
pH (in concentrate): 1.0
Recommended dilution: 1:12 - 1: 2
Viscosity: Water thin
Solubility: Complete with water
Flash point: None
Storage / Stability: 2 years
Storage/Stability: 1 year
Freeze/Thaw stability: Keep from freezing
Weight per gallon: 9.13 lbs/gal.