A complete line of rotary floor
machine brushes, featuring
grit-filled brushes, general
scrubbing brushes and rotary
pad-drivers.
The key to
remember when ordering these
items is the block diameter in
relationship to the machine
size. A brush is sized 2 inches
smaller than the machine
because of the flare of
the brush fibers. Pad drivers
are specified 1 inch smaller
than the machine.
Example: If you
own a 17" floor machine (this is
measured on the underside of the
machine measuring from bumper to
bumper) you would order a 15"
brush and this does include a
clutch plate.
Medium Duty
Scrubbing Brush
For cleaning hard surfaces.
Polypropylene scrubbing brushes feature .028"
diameter fill material
throughout the block.
*This brush is not suitable for carpet.
Mal-Grit Extra
The most aggressive Stripping Brush available. This
heavy gauge nylon with larger grit is used for stripping heavily soiled floors,
such as concrete floors in an industrial setting.
For Aggressive Scrubbing of Brick & Stone, Rough or Unsealed Concrete, and Aggressive Stripping of Sealed Concrete and Terrazzo Floors.
Tynex A nylon fibers impregnated with 46 grit silicon carbide. 1-3/4" trim.
The "POWER-PAD"
is a unique combination
of a brush to handle all the
“lows” and a pad driver to clean
all the “highs”. This design
creates a multi-level scrubbing
action that produces results
superior to standard rotary
brushes and pad drivers. Reduces
the need for multiple passes
during floor stripping or
scrubbing. Ideal for use on
unsealed or sealed concrete,
terrazzo, vinyl tile,
ceramic/quarry tile and
linoleum.
Power-Pad with
Mal-Grit Combines our most
popular Grit brush with a pad
driver for general scrubbing or
stripping finishes from hard
surfaces. Effectively cleans
wide grout lines.
Scrape-Away
Concrete Floor Preparation Tool
IMPORTANT: All concrete floor tools are designed for use only by experienced rotary floor machine
operators wearing protective eyewear, footwear, and dust mask. Always use the proper size standard 175 rpm rotary
floor machine(1.5 HP or greater), equipped with the proper heavy-duty "N" series clutch plate.
Do not use with flammable materials.
Productive, economical, and environmentally safe method for scraping and preparing concrete floors
and stripping of film coatings, packed soils, ice, etc.
The heavy-duty circular aluminum casting has a 5" center
hole.
Equipped with 6 replaceable carbon steel cutter blades. Each blade has 8 cutting
edges. Three replacement blades in a set.
Available in 15", and 17" sizes. Order
1" smaller than machine
size.
Blades are priced per set of 3
A full replacement requires 2 sets
Special note pertaining to ALL floor
machines brushes: All brushes ordered are
considered special order and require a 10-12
day lead time and are NOT RETURNABLE.
