Simple Blue effectively cleans virtually any surface:
- Ceramic tile, Walls, Restroom fixtures, Partitions, Counter tops, Vinyl seats, Floors, VCT (unfinished)
For floor care use, Simple Blue Cleaner aggressively removes embedded soils and scuffs in the top layers of floor finish and prepares the surface for re-coating with minimal rinsing required. This low foam formula leaves a clean, film free surface making it ideal for use in an auto scrubber. Simple Blue can also be used to remove the factory seal from newly installed VCT flooring and is compatible with any floor care program.
Simple Blue is an EXCELLENT scrub and recoat cleaner for floor care maintenance.
Simple Blue is a general purpose cleaner and is NOT intended as a daily cleaner for finished floors. If you seek a Great Neutral Floor Cleaner, try Green Magic
Simple Blue Benefits:
- Works in cold water
- Works in hard water
- Effective cleaner
- Low end-use cost
- No-rinse formula
- Multiple dilutions
- Countless applications
- Time Saving
Directions for use:
- Light-duty cleaning: Use 1 ounce per each gallon of water.
- Medium-duty cleaning: Use 2 ounces per each gallon of water.
- Heavy-duty cleaning: Use 4 ounces per each gallon of water. Apply product by spray, mop, sponge, cloth or auto-scrubber to surfaces to be cleaned. If necessary, agitate to help remove excessive soils. Wipe dry with clean cloth or rinse thoroughly with clean water after use.
Scrubbing and recoating of floors: Fill a mop bucket with Simple Blue Cleaner at 4 ounces per gallon and water. Apply to floor surface and allow 2-3 minute dwell time, scrub floor with blue/green floor pad under a floor machine/automatic scrubber.
Simple Blue Cleaner Specifications
Active ingredients: 14%
pH (concentrate): 10.5 - 11.0
Recommended dilution: 1:20 - 1:128
Viscosity: Water thin
Solubility: Complete with water
Rinsability: Complete with water
Flash point: None
Storage / Stability: 2 years
Weight per gallon: 8.85 lbs/gal.
Freeze / Thaw stability: Keep from freezing