Reduce Slip & Fall Accidents: The Square Strip machine has the ability to dry scrub several layers of finish off the floor without the use of water or chemicals. This Green Process will reduce slip and fall accidents for both workers and occupants.
Easy To Use: The Square Strip is very easy to use and quick to learn. A new operator of the machine can become proficient within minutes instead of the hours a conventional rotary floor machine would take to become acquainted with.
It's Fast: The Square Strip can scrub/strip up to 4,000 square feet of flooring an hour under normal conditions.
Proven Technology: Square Strip Oscillating / Orbital Floor Machine is designed to scrub and strip floors using orbital technology.
The Square Strip is a versatile, oscillating / orbital floor machine that is very aggressive and easy to use, by eliminating side-to-side torque as with a conventional rotary floor machine.
It's Dry: The Square Strip utilizes a dry chemical free process to prepare tile flooring to be re-finished. The Dry Strip Process uses the specially engineered Surface Preparation Pads (14" x 20" rectangular pads) and easily removes surface finish in preparation for recoating.
- No more lifted or "popped" tiles due to overuse of water and flooded floors.
- The ideal machine when you need to strip/scrub "half a hallway"
- A "Green Process" in floor care
- No extra hand scrubbing required with the Square Strip. It does all the work!
The Square Strip when used DRY does not remove ALL the floor finish. In most cases this machine will remove between 85-95 percent of the floor finish allowing for a quick, fast and easy re-coat.
The Square Strip when used WET with conventional floor strippers can completely remove ALL layers of floor finish, similar to that of a conventional floor machine. Simply change from the Maroon pad to Black stripping pad.
The Square Strip compares well against the Clarke BOS 18, Advance FM800, Square Scrub & Tomcat Edge oscillating / orbital floor machines. At a fraction of the COST!
Square Strip Oscillating Floor Machine Specifications
Body Construction: 10 gauge steel
Axle: 3/4" solid steel
Handle Bar: 12 gauge adjustable
Finish: Powder coated - metallic grey
Wheels: (2) 8" x 2" non-marking
4 top weights (11 3/4 lbs. each)
1 bottom weight (18 lbs.)
Height: 44 in.
Length: 25 in. (front of machine to back wheels)
Cleaning Width: 14 in. deep 20 in. wide cleaning path
Weight: 185 pounds, 200 pounds (shipping)
Motor / Power System
Motor: 1.5 hp
Motor Frame: 180
Amp Draw: 9 amps
Voltage: 120 volts AC
Sound Level: 62 decibels
Power Cord Length: 50 feet (safety yellow) 12/3 with quick disconnect
Cleaning Rate Per Hour: Up to 4,000 square feet per hour
Dust Containment Kit: Optional
Pad Holder Plate / Speed
Pad Size: 14 in. x 20 in.
Oscillations: over 2,400 per minute
Vibration Compensators: (4) x 2 in. diameter
Pad Pressure: 95 lbs. per square foot
Machine & Motor:
1 year warranty parts & labor (expect wear parts)
1 year warranty on motor