-Two of our longest lasting blade rings that contain 28 diamond segments.
-Blades are effective for fast quick grinding on steel floors and concrete floors in preparation for coatings, sealers, and paints.
-Smoothes rough surfaces or trowel marks.
-Repairs surface damage to concrete slabs.

- Single longer lasting blade ring with 18 diamond segments.
- Effective for fast quick grinding on steel and concrete floors in
preparation for coatings, sealers, and paints.
- Smoothes rough surfaces or trowel marks.
- Repairs surface damage on concrete slabs.
- Removes urethanes or epoxy thin coats.
- Levels high spots.
- Removes thin mastics and thin-set.

- Single long lasting blade ring with 12 diamond segments.
- Fastest blades for quick grinding on steel and concrete floors in preparation for coatings, sealers, and paints.
- Smoothes rough surfaces or trowel marks.
- Repairs surface damage on concrete slabs.
- Removes urethanes or epoxy thin coats.
- Levels high spots.
- Removes thin mastics and thin-set.

-Two of our longest lasting smooth grind blade rings with 28 diamond segments.
- Effective for smooth grinding of terrazzo and concrete floors in
preparation for coatings, sealers, and paints.
- Grinds or polishes terrazzo floors.
- Grinds sharp aggregates such as flint and granite.
- Removes surface imperfections from epoxy mortars.

-Single longer lasting smooth grind blade with 18 diamond segments.
-Effective for faster smooth grinding on terrazzo and concrete floors in preparation for coatings, sealers, and paints.
- Grinds or polishes terrazzo floors.
- Grinds sharp aggregates such as flint and granite.
- Removes surface imperfections from epoxy mortars.
- Smoothes rough surfaces or trowel marks.

Carbide Scrapers

This carbide scraper uses a four sided blade to skim off paint, mastics, resins, tar, fiber glass, specialty coatings, industrial build-ups, and carpet backing without damaging surfaces.

Carbide Cutter Inserts

Replacement Carbide cutter inserts. A complete set of carbide cutter inserts for a 19" Cimex requires a total of 27 cutters (9 per disc x 3 discs).

CARCUT cutter insets are sold individually.

Weight Kit for Stone Polishing

Add an additional 35 lb. weight ring to your existing Cimex R48-DF (diamond finishing machine).

Increase grinding power and down pressure. Works only with the Cimex R48-DF machine.

Weights are stackable for the R48-DF machine, a maximum of three weights are recommended.

The weight ring stacks on top of one another and is secured via center stud and wing nut.

Increase grinding power and down pressure. Works with all 19" Cimex machines. Primarily used with either marble grinding, concrete grinding, or other grinding of stone surfaces.

Two brackets and two 20 lbs weights for a total of 40 pounds.

The weight kit bolts to the forks of an existing Cimex R48.

Velcro Pad Drivers

Its secure locking system allows for effective use of Diamond Resin Pads and accessories.

3M Instalock material coupled with foam backing allows for scrubbing pads of all types to be securely held in position.

This steel wire brush with 1.6mm diameter wire bristles is designed for general scarifying, and the removal of rubber carpet backing, grease, oil, wax, dried paint, ice, and food build up without damage to the substrate.

This heavy duty steel wire brush with 2mm diameter wire bristles is designed for heavy scarifying and the removal of rubber carpet backing, grease, oil, wax, dried paint, ice, and food build up without damage to the substrate.

General Purpose Brushes

This heavy duty and long lasting brush is safe for scrubbing on hard flooring surfaces.

This long lasting brush is safe for scrubbing on hard flooring, as well as carpet flooring surfaces. This is the more common carpet cleaning brush used.

This scrub brush is safe for use on most surfaces. It's great for economical general scrubbing.