Hard Surface Floor Sealer & Finish - An extremely durable, long lasting sealer/finish designed especially for terrazzo, quarry tile, brick, stone, Mexican tile, and all other non-resilient floors. Levels and adheres on all the above mentioned surfaces, leaving a durable high quality protective coating that lasts longer than most floor finishes found today.
Granite is easy to apply, and it's economical. It seals porous floors and leaves a tough protective finish at the same time. Granite is also extremely versatile. It can be applied as a seal/finish to terrazzo, unglazed ceramic, quarry tile, concrete, paver brick, unpolished marble, slate, natural stone and resilient tile. And it's formulated to dry fast (less than 30 minutes, no long wait or extended downtime.
- Formulated to seal porous flooring.
- Easy to apply no matter what the conditions.
- Attractive, medium luster finish
Safe for use on:
- Ceramic Tile
- Quarry Tile
- Mexican Tile
- Porcelain Tile
Sealing and Finishing: Apply a liberal coat of sealer/finish evenly with a clean floor finish mop. Allow to dry for at least 30 minutes before applying additional coats. Two or three coats may be desired initially depending on the gloss desired and the condition of the floor.
Maintenance: Use a suitable dust mop for the removal of surface dirt and grit. Mop or scrub with a neutral or all-purpose cleaner to remove all soil. After cleaning touch up traffic lanes as necessary or recoat the entire floor. If spray buffing is desired, dust mop floor thoroughly and buff using a spray buff or polishing pad.
This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.
Granite is packaged in one gallon containers or four gallons per case if ordered by the case.
Granite Stone Sealer / Finish Specifications
Type: Water base acrylic
Non-volatile solids: 18%
Color: Milky white (in container)
pH: 8.5 - 9.0
Dry/Recoat time: 30 minutes
Slip Resistance: .56 - .60 (ASTM-D2047-82)
Gloss: Greater than 88
Removability: With conventional strippers
Detergent Resistance: Excellent
Stain Resistant: Very good
VOC content: 0.369 per gallon
Storage / Stability: 2 years
Dry / Recoat Time: 30 minutes min.
Coverage: 1500-1800 ft per gal. (1st coat)
1800-2000 ft per gal. (2nd coat)
Storage / Stability: 1 year
Weight Per Gallon: 8.57 lbs./gal.
Freeze / Thaw Stability: Keep from freezing
UL APPROVED: Independent testing for slip resistance by Underwriter Laboratories confirms the static coefficient of friction of Granite Floor Sealer meets or exceeds 0.5 as determined by ASTM Method D 2047.