Stone Floor Sealer for Ceramic, Quarry, Marble and Granite Floors

Stone Floor Sealer

Hard Surface Floor Sealer & Finish - An extremely durable, long lasting sealer/finish designed especially for terrazzo, quarry tile, brick, stone, Mexican tile, and all other non-resilient floors. Levels and adheres on all the above mentioned surfaces, leaving a durable high quality protective coating that lasts longer than most floor finishes found today.

Granite is easy to apply, and it's economical. It seals porous floors and leaves a tough protective finish at the same time. Granite is also extremely versatile. It can be applied as a seal/finish to terrazzo, unglazed ceramic, quarry tile, concrete, paver brick, unpolished marble, slate, natural stone and resilient tile. And it's formulated to dry fast (less than 30 minutes), so there is no long wait or extended downtime.

For use on:

Terrazzo
Ceramic Tile
Granite
Marble
Concrete
Quarry Tile
Brick
Mexican Tile
Porcelain Tile

Order #0045501

Granite Stone Sealer

Add/Qty	Price	Pack	Unit

M ore Information

Floor Care products

Mops & Handles

Granite Stone Sealer / Finish Specifications
Type:	Water base acrylic
Non-volatile solids:	18%
Color:	Milky white (in container)
Odor:	Mild
pH:	8.5 - 9.0
Dry/Recoat time:	30 minutes
Slip Resistance:	.56 - .60 (ASTM-D2047-82)
Gloss:	Greater than 88
Leveling:	Excellent
Removability:	With conventional strippers
Detergent Resistance:	Excellent
Stain Resistant:	Very good
VOC content:	0.369 per gallon
Storage / Stability:	2 years
Coverage:	1000-1500 ft per gal. (1st coat) 1500-2000 ft per gal. (2nd coat(

Packaging: One gallon containers or four gallons per case if ordered by the case.

FLOOR COATING AND FINISHING MATERIAL
AS TO SLIP RESISTANCE ONLY
UL410 STANDARD

Directions:

SEALING and FINISHING: Apply a liberal coat of sealer/finish evenly with a clean floor finish mop. Allow to dry for at least 30 minutes before applying additional coats. Two or three coats may be desired initially depending on the gloss desired and the condition of the floor.

Maintenance:

Use a suitable dust mop for the removal of surface dirt and grit. Mop or scrub with a neutral or all-purpose cleaner to remove all soil. After cleaning touch up traffic lanes as necessary or recoat the entire floor. If spray buffing is desired, dust mop floor thoroughly and buff using a spray buff or polishing pad.

This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.