The non-ammoniated formula contains no harsh caustics and
does not leave behind harsh alkaline residues. No residue prevents finish
application problems from improper rinse procedures. PS-X2 is
designed to be effective as a "No Scrub" floor stripper. It uses a
concentrated solvent system that re-dissolves the floor finish, rather than
an alkaline system that breaks the finish loose from the floor. The
dissolved finish stays liquefied, reducing "pad clogging", when used in a
scrub application.
PS-X2 will handle the toughest floor buildup. It will quickly penetrate,
emulsify, and liquefy multiple layers of floor finish for complete removal.
The 1:6 dilution ratio also lowers end-use cost. This product is a true time
and labor saver.
Quickly penetrates multiple layers of floor finish
Fast floor stripping action
No-rinse formula eliminates flood rinse
No harsh caustics make it more user friendly
Fast acting - saves time and labor
High active formulation - effective on heavy buildup
PS-X2 is an aggressive
fast acting floor stripper designed for the removal of water based floor coatings.
The concentrated solvent and surfactant formulation re-emulsifies floor
coatings rapid removal. This non ammoniated formulation quickly removes
finish without the offensive odor of ammonia. PS-X2 saves time and
labor when tackling difficult stripping jobs.
Directions:
Wear safety equipment recommended on MSDS, place Wet Floor Signs and
read all directions and cautions prior to beginning your work.
See Label For Dilution Instructions
Dilute 1:6 (18 oz. per gallon) with COLD WATER.
For light build-up dilute 1:16 (7 oz. per gallon)
Apply solution at rate of
150-300 square feet per gallon.
Apply enough solution to ensure complete
wetting. Re-wet floor if necessary.
Allow to work for 5-10
minutes. DO NOT ALLOW SOLUTION TO DRY.
Apply more solution if needed.
If machine stripping scrub the floor with a PT-2000 High
Performance Stripping Pad or equivalent.
Pick up solution with a wet
vacuum, auto scrubber or mop and bucket.
Change water often when using a mop & bucket for pick up.