| |
Cleaning Equipment |
 |
|
|
|
|
|
|
|
|
|
| |
Industrial Duty Floor Scrubbers |
| Tomcat scrubbers
are designed and built to clean car dealerships, machine
shops, warehouses, assembly plants, or just about any
application where cleaning performance is desired and
durability is demanded. While offering the toughness you
are looking for, your operators will find them easy to
maneuver into tight areas, and simple to service. The
Magnum series
can accommodate large batteries for superior run time.
The platform is available with different scrub heads, in
both disk and cylindrical configurations. Brush pressure
is maintained at one of five settings by the Central
Command II. |
 |
| The three
DISK
machines with 26", 30"
and 34" scrub paths offer more
cleaning power than other machines. The disk deck is
protected by heavy steel guards, and polyurethane
rollers deflect impacts. Both brushes are
gimble-mounted, which improves cleaning on uneven
floors, and driven by a set of powerful motors, for
unmatched scrubbing.
The
CYLINDRICAL machines have the added
benefit of sweeping up debris while scrubbing. This may
eliminate a need to dust mop, and greatly increase
productivity.
The tank tips
back for easy and full access to all the critical
components, greatly simplifying maintenance. Tomcats "Drain Saver"
basket captures all the small debris and litter, so you
can dispose of it properly, instead of clogging floor
drains.
A strong sealed,
all-gear transaxle permits climbing steep ramps, and
while heavy-duty, chemical resistant tires are standard,
grey non-marking tires are optional. The drive tires and
caster wheels are oversized, which permits better
clearance and navigation of obstacles. The transport
speed of 4 mph can adjust to 3 mph any time the operator
begins scrubbing.
Tomcat continues
to build equipment with a central "frame".
On further inspection, you will notice that our
transaxle, casters, scrub deck, squeegee linkage, and
battery package all index directly to a 7 gauge steel
frame. Although our tanks have the thickest walls in the
industry, we do not transmit any structural forces to
them or allow normal collision damage to impact them.
The Magnum series, is built with 100% stainless
fasteners, which simplifies service in the future.
With over 150 programmable features,
we will gladly set the machine up to satisfy your needs.
The LCD include 3 hour meters for better manager
oversight (key switch, transport, burnishing), and
illustrates error codes for a simplified trouble
shooting. If the battery gets too low, the unit will
automatically shut down "non-vital"
systems. |
|
Control System:
Central Command II is the brains of the outfit. Our
control module is sealed for protection against water, and
easily accessed if service is ever required.
Scrubber / Sweeper Combination:
These machines are similar to the disk machines outlined
except for the scrub system. Our 26"
30" & 34" cylindrical
units use two brushes, which sweep and scrub
simultaneously.
Scrubbing:
In especially heavy soil conditions, our cylindrical
machines scrub even harder than our disk machines. If you
have a dirty floor to clean, you will be impressed by the
machines capability.
Sweeping:
Both machines can pick up bolts, wood chips, steel
tailings, and heavy items up to 1 inch high. Swept refuse
is held in a slide-out dirt hopper, with approximately a
1.0 cubic foot capacity. |
|
|
|
|
|
|
|
|
|
|
|
Standard Features Included On All
Machines |
* 210 AH battery pack
* Automatic 25 amp charger
* Battery condition gauge
* Brush pressure control
* Foam shutoff
* Electric actuator for brush head
* Two brushes or pad drivers
* Non-marking tires and casters
* Polyurethane Corner Rollers
* Stainless Steel Fasteners |
Many Available Options Include:
* Vac Hose & Wand Kit
* Spray Jet Kit (pressurized flow)
* Easy Fill
* On-board battery charger
* E-stop (emergency stop switch)
* 325 amp hour battery pack
* Maintenance free batteries (gel) |
|
 |
|
|
|
Tomcat "Magnum" Industrial Floor Scrubber
Specifications
|
|
|
Disk Scrubbers |
Cylindrical Scrubbers |
| |
26" 30" 34" |
24" 27" 30" 34" |
|
Body Construction
|
|
Tank Construction:
|
7/16" Roto-molded poly |
7/16" Roto-molded poly |
| Chassis Construction: |
3/16" Plated Steel |
3/16" Plated Steel |
| Drive Wheels: |
(2) 11" diameter x 4" |
(2) 11" diameter x 4" |
| Casters: |
(2) 5" Diameter x 2" |
(2) 6" Diameter x 2" |
|
Dimensions |
| Height: |
43 in. |
|
| Length: |
56 in |
56 in. |
| Width (body): |
28 in. |
28 in. |
| Width (squeegee): |
35" for 26" model
38"
for 30" model
45" for 34" model |
35" for 24" model
35" for 27" model
38" for 30" model
45" for 34" model |
| Weight (w/ batteries): |
971 lbs. |
974 lbs. |
|
Brush / Pad System
|
| Brush / Pad Diameter: |
Disc Brush
(2) 13 in. - 26" model
(2) 15 in. - 30" model
(2) 17 in. - 34" model |
Cylindrical Brush
(2) 22 in. - 24" model
(2) 25 in. - 27" model
(2) 28 in. - 30" model
(2) 32 in. - 34" model |
| Motor Horsepower: |
(2) .75 hp
|
(2) .75 hp |
| Motor RPM: |
270 rpm |
750 rpm |
| Brush Down Pressure: |
0-250 pounds |
0-250 pounds |
|
Battery System
|
| Battery Count: |
4 |
4 |
| Battery Rating: |
210 amp hour
Optional
325 amp hour |
210 amp hour
Optional
325 amp hour |
| Battery Description: |
6 volt deep cycle |
6 volt deep cycle |
| Battery Run Time: |
Up to 5 hours |
Up to 5 hours |
| Charger: |
24 amp automatic |
24 amp automatic |
|
Solution System
|
| Solution Tank Capacity: |
30 gallons |
30 gallons |
| Solution Flow Rate: |
Up to .75 gal/min. |
Up to .75 gal/min. |
|
Recovery System
|
| Recovery Tank Capacity: |
30 gallons |
30 gallons |
| Vacuum Horsepower: |
1 hp, 3-stage |
1 hp, 3-stage |
| Waterlift: |
68 in. |
68 in. |
|
Drive System
|
| Transaxle Description: |
.75 hp, sealed |
.75 hp, sealed |
| Speed Control: |
Variable 0-230 ft. |
Variable 0-230 ft. |
|
Productivity
|
| Cleaning Width: |
26 in.
30 in.
34 in. |
24 in.
27 in.
30 in.
34 in. |
| Cleaning Rate / Hour: |
26,000 sq. ft./hour - 26" model
30,000 sq. ft./hour - 30" model
34,000 sq. ft./hour - 34" model |
24,000 sq. ft./hour - 24" model
27,000 sq. ft./hour - 27" model
28,000 sq. ft./hour - 30" model
31,000 sq. ft./hour - 34" model |
|
Warranty
|
|
Tanks:
10 years, Parts: 3 years. |
|
|
|
|
|