|
 |
| |
Cleaning Equipment |
 |
|
|
|
|
|
|
|
|
|
| Concrete
Floor Polisher with Dust Control |
| The first propane powered burnisher
designed to polish and maintain concrete floors. The EP-27
propane powered Concrete Floor Polisher was built to satisfy the
needs of all contractors that want to truly "POP" the shine
on polished concrete, terrazzo, marble, VCT and other tile floors
without leaving dust behind. |
| The EP-27 increases floor temperature
during burnishing so that the gloss level rises when used with
sodium, potassium, or lithium densifiers and guard products.
The EP-27 concrete floor buffer while
burnishing increases the floor temperature. The increase in floor
temperature increases the shine. This machine is great for concrete
polishing with black or diamond pads.
That means you get a beautiful shine - fast.
The EP-27 comes with a handheld infrared
thermometer and a weighted metal pad driver.
Each machine comes standard with 360 degree
floating swivel spin-on pad driver, Kill Switch, Emissions Shut Down
system, adjustable handle, Tach O Meter, safety-fill fuel cylinder
with overfill prevention device (OPD) UL and DOT approved, and
limited two year warranty.
|
 |
| Order #1502027 |
| 27" Concrete Polisher
|
|
|
Shipping
rates range from $150.00 - $225.00
depending on final destination.
Residential deliveries may incur an
additional charge of $25.00 - $40.00 |
|
Call 800-836-0862 to order |
|
|
Built to meet GS-40 and LEED standards
set for
floor maintenance to capture dust
and keep the working environment
safe.
-
40-47 lbs. of pad pressure delivers high gloss appearance
-
On-board battery starter system for reliability and ease
of use
-
Adjustable handle for height variations
|
| |
|
|
|
 |
 |
Features:
- Built to meet GS-40 & LEED requirements
- Use when applying sodium, potassium, or
lithium densifiers and guard products
- Produces Heat Required to set Concrete
Sealers, Guards, Densifier, and Impregnators
- Captures dust in re-useable filter bag
- Reusable Dust Bag
- Adjustable wheel brackets
- Cordless operation
- Emissions Shut Down System
- Three-Way Catalytic Muffler
- Full Contact Weighted Pad Holder
|
|
EP-27 Concrete Polisher |
| Production |
33,000 sq ft |
| Engine |
Kawasaki 18hp (603 cc) |
| Run Time: |
5-6 hours per propane tank |
| Engine Speed |
3,600 rpm |
| Pad Speed |
1,800 rpm |
| Pad Size |
27" |
| Head Weight |
Up to 40 lbs |
| Machine Dimensions |
L 52" x W 28" x H 33" |
| Total Weight |
275 lbs |
| All engines exceed
Environmental Protection Agency (EPA) and
California Air Resource Board (CARB) regulations for
exhaust emissions.
Meets GS-42 & LEED standards for floor maintenance
equipment. |
|
| |
|
|
Feature |
Benefit |
| Kawasaki 603 cc |
Low emission engine |
| Emissions Monitor with auto
shut down |
Engine shuts down if emissions read too high,
protecting operator health |
| 3-Way Catalytic Muffler |
Lowers emissions |
| Dust skirt assembly |
Spring action keeps skirt sealed to the floor
which keeps dust under machine |
| On-Board battery start |
No power cords required to start
engine |
| Service alert meter |
Alerts operator to service intervals, includes
hour meter |
| Cogged Drive Belt |
Allows belt to run cooler, less breakage equals
longer life |
| Gentle Tilt Back |
Easy pad change |
| Padded Propane Tank Mount
|
Decreases vibration and noise |
| Mechanical Tank Lock |
Secures propane tank |
| Tool-less Oil Drain |
Speeds oil change process |
| Low Oil Pressure Switch |
Engine shuts down with low pressure, preserving
engine |
| Two-Stage Engine Filter |
Keeps engine cleaner longer and helps lower
emissions |
| Low Profile Aluminum Deck |
Rust proof construction saves time buffing near
corners and under racks |
| Easy Grip Handles |
Ergonomically friendly keeps operator
comfortable |
| 27" Width High Speed
Burnishing |
Lowers labor and increases shine |
| Ergonomic Machine Design |
Anti-fatigue to operator |
| Heavy Duty Construction |
Long lasting, solid built, with UL components |
| Adjustable Handle Arm |
Comfortable for any height operator |
| EPA & CARB Certified |
Low emission certification |
|
|
|
|
|
|
