| |
High Speed Floor Finish - Ultimate II |
| A unique formula containing a super
high solids acrylic floor seal and finish which
has been fortified with a special water borne urethane.
This new and unique urethane
fortifying system is designed to give you a two coat floor finish which has exceptional
gloss, toughness, flexibility, extended wear and chemical resistance. |
|
|
|
|
| Product Pricing |
Ultimate II (gallon)
|
|
| Product Pricing |
Ultimate II (5 gal pail)
|
|
| |
|
|
|
Ultimate II finish offers substantial savings in time and labor costs, and is an extremely versatile
product which can be used with excellent results on Resilient Type Floors, Quarry Tile,
Terrazzo, Concrete, Sealed Wood and nearly any other type of floor. An excellent floor
polish for use in office buildings, schools, churches, warehouses, shopping malls,
hospitals, restaurants, etc. |
|
- Unexcelled as a base finish for future spray buffing
and in addition, this finish will withstand repeated burnishing and continue to yield a
glass like appearance time after time.
|
|
Meets or exceeds
UL and CSMA standards for slip resistance (ASTM-D-2047-69) |
|
Directions: |
|
Initial
Application: @2000 square ft. per gal. |
|
For best results, initial application should be
made on a dry floor that has been thoroughly stripped and well rinsed.
Apply an even coat of finish with a high quality
string mop (16-24 oz. works best) or wax applicator which has been rinsed in clear water
and wrung nearly dry. Never contaminate finish mops or applicator with cleaners or
strippers!
Two coats will adequately seal the floor and give
excellent gloss. However, if flooring is exceptionally porous, worn or old, then
additional protection may be required and a second coat is recommended. Allow 30-45
minutes between additional coats.
|
|
Maintenance: |
|
Damp mop or sweep daily, or as frequently as
necessary to keep floor surface clean and free of dust, dirt and extraneous matter. When
mopping use a neutral free rinsing detergent. Where heavy traffic has abraded finish and reduced
luster, a very thin coat can be used to restore gloss and add protection.
|
|
Spray Buffing:
Ultimate II finish provides an excellent base for spray buffing which will enhance gloss and keep the
floor looking its best.
Burnishing:
This product will withstand repeated high speed burnishing and will give a glass like
appearance time after time.
Stripping:
Due to the unique formulation of this
finish it is recommended that a concentrated floor finish stripper such as "Pour-N-Peel" be used to remove this product.
|
We Also Carry
|
|
