Directions for use:
Preparation: If stripping is necessary, use a high quality stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
Finishing: Apply 3 or 4 liberal coats of seal and finish using a clean mop. Allow a minimum of 45 minutes drying time between coats. Apply additional coat to obtain desired gloss.
Burnishing: Dust mop or sweep thoroughly. Clean floor with a neutral floor cleaner diluted according to directions. Burnish using the appropriate pads.
Restoration: Dust mop or sweep thoroughly. Dilute restorer according to manufacturers direction and apply to floor with clean mop or auto-scrubber. Allow to dry to a haze and buff out with any type of UHS equipment-propane, battery, or electric.
Recoating: Dust mop or sweep thoroughly. Deep scrub using a neutral floor cleaner diluted according to directions. Apply 1 or 2 liberal coats of finish using a clean mop.
Packaging: 2.5 gallon containers or 2 x 2.5 gal. if ordering it by the case.
Elements Floor Finish Specifications
Non-volatile Solids: 20.0 + 0.5%
Color: Milky emulsion
Color (dried): Crystal clear
Odor: Low
pH: 8.0 - 9.0
Dry/Recoat Time: 45 minutes min.
Slip Resistance: 0.5 min. by ASTM-D2047
Durability: Excellent
Buffability: Spray buffing or high speed burnishing
Removability: With instant type strippers
Detergent Resistance: Excellent
VOC Content: 0.34 lbs./gal.
Coverage: 2000 sq. ft per gallon
Storage/Stability: 1 year
 EcoLogo Certified
EcoLogo is North America's largest, most respected environmental standard and certification mark. EcoLogo provides customers - public, corporate and consumer - with assurance that the products and services bearing the logo meet stringent standards of environmental leadership.
|