Professional duty battery powered spray tank with a 2.5 gallon capacity tank, coupled with a lithium ion battery for power, makes this a perfect companion for applying cleaners and cleaning chemicals without the wasted time of "Hand Pumping".
Simply fill the tank with your cleaner, attach the top pump, switch on the power pack, and spray.
Battery Powered Sprayer Features:
- Viton and EPDM seals are used in the Hose, Wand, Trigger Valve
- Backup Manual Pump (if needed to complete the job)
- Chemical Resistant Hose
- Wand holder
- On/Off Switch
- Connection Knob
- Battery Power Level Indicators
- User Replaceable Power Cells
- Built in Drip Cup
The EM Pro Series pressurizes the air in the tank for efficient and consistent application of material vs. pumping the tank contents directly. By pressurizing the air in the tank, the life of the rechargeable lithium ion power cells are maximized due to the latest power density technology.
- This results in a full day of spraying on a single charge.
Every unit is fully tested and precisely tuned to control tank pressure within 2 psi of the optimum pressure for efficient and consistent application of material.
The Power Pack easily attaches to the tank with a simple "push and click", turn the Power Pack on and let the automation work for you.
- Rotate the knob to remove the Power Pack while the tank is still under pressure if needed
Battery Powered Sprayer Includes:
(1) 2.5 gallon spray tank
(1) 48" hose
(1) 18" wand
(1) Poly trigger with Viton seals
(1) Lithium ion battery
(1) Battery charger
Battery Powered Sprayer Specifications
Material: High strength poly
Strength: Thick walled - high burst pressure >60 psi
Chemical Resistance: Resistant to a wide range of chemicals (not for use with solvents)
Endurance Test: Six foot drop test
Capacity: 2.5 gallon (wide mouth opening)
Operating Pressure: 16 psi
Material: Flexible reinforced double wall
- 0.54" (outside diameter)
- 0.31" (inside diameter)
- 48" (overall length)
PolyChem Spray Wand
Lightweight yet robust poly construction, this wand contains all viton seals
Length: 18 in.
Material: Chemical resistant polymer
Capacity: High capacity pump requires fewer strokes for higher pressure
Seals: Viton and EPDM
Type: Li-Ion - 5200 mAh
Voltage: 7.4 DC
Recharge Time: 5 hours (110-120 AC volts input)
- LED: Red = charging
- Green = charged
- LED: Green = charged
- Yellow = half charge
- Red = discharged
Total Weight with Battery: 7.1 lbs.
Total Run Time: 6 - 8 hours
Not for use with petroleum based products.