A new generation floor finish formulated with a patented polymer technology that is designed to work with a variety of maintenance methods, equipment, and floors due to its ultra-compatibility and flexibility. The finish provides superior gloss, excellent durability, and superior leveling. New chemistry allows the finish to form good film even in poor drying conditions. Response is unsurpassed with any type of Ultra High Speed equipment - propane, battery, or electric.
For use on:
Vinyl, vinyl composition, asphalt, rubber, concrete, flagstone, brick, terrazzo, sealed wood.
Recommended to be used in:
- Department stores
- Hospitals, nursing homes
- Food service facilities
If stripping is necessary, use a high quality stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow drying completely.
Apply 2 or 3 liberal coats of finish using a clean mop. Allow a minimum of 45 minutes drying time between coats. Apply additional coat to obtain desired gloss.
Dust mop or sweep thoroughly. Clean floor with a neutral floor cleaner diluted according to directions.
- Burnish using the appropriate pad
Dust mop or sweep thoroughly. Dilute restorer according to manufacturer direction and apply to floor with clean mop or auto-scrubber. Allow to dry to a haze and buff out with any type of UHS equipment-propane, battery, or cord electric.
Dust mop or sweep thoroughly. Deep scrub using "Simple Blue" cleaner diluted according to directions. Apply 1 or 2 liberal coats of finish using a clean floor finish mop.
Flex is packaged in 2.5 gallon containers or 2 x 2.5 gallons if ordering it by the case. A case contains five gallons.
Flex Floor Finish Specifications
Color: Milky white emulsion
Dry Time: 30-40 Minutes
Slip Resistance: .5 min by (ASTM-D2047)
Removability: With instant strippers
Coverage: 1800 - 2000 sq. ft./gal.
Dry / Recoat Time: 30 minutes
Detergent Resistance: Excellent
Black Mark Resistance: Excellent
VOC Content: 0.40 lbs./gal.
Scuff Resistance: Excellent
Film Clarity: Excellent
Gloss (ASTM D 1455): 92 Min.
Solids Content: 20%
Maintenance: Weekly burnish or spray buff
Storage / Stability: 1 year
Freeze / Thaw stability: Keep from freezing
Independent testing for slip resistance by Underwriter Laboratories confirms the static coefficient of friction of Flex Floor Finish meets or exceeds 0.5 as determined by ASTM Method D 2047.