eLuminate High Performance Floor Finish - A new generation floor finish formulated without using zinc or heavy metals. This new polymer technology is designed to work with any type of floor maintenance program. This finish provides high initial gloss and unmatched gloss retention. New chemistry demonstrates exceptional soil resistance and color retention that far exceeds the leading commercial zinc containing finishes and allows the finish to form good film even in poor drying conditions.
eLuminate was developed using highly advanced polymer technology to provide a premium environmentally preferred floor finish. This high solids finish offers a clear, deep gloss and requires fewer coats to achieve the desired results.
- eLuminate will not powder with frequent burnishing and is detergent resistant
- Excellent leveling and low odor makes it easy to apply
- Green Certified by UL/ EcoLogo
- Exceptional Quat resistance (quaternary ammonia chloride)
- Outstanding soil resistance
Because eLuminate does not contain zinc, it is formulated with very little ammonia. Reducing the amount of ammonia in floor finishes yields two major benefits: it eliminates the unpleasant odor and it dramatically improves recoatability.
Independent testing for slip resistance by Underwriter Laboratories confirms the static coefficient of friction of eLuminate meets or exceeds 0.5 as determined by ASTM Method D 2047.
If stripping is necessary, use a high quality stripper and follow the directions accordingly. Follow with a thorough rinsing and allow floor to dry completely. If stripping is not necessary; sweep up loose dirt and dust. Clean with a quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. 4-5 coats is ideal initially, depending on the condition of the floor and desired gloss.
Floor Finish Maintenance:
The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.
This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and federal regulations
- eLuminate floor finish is packaged in one gallon containers or four gallons per case.
- eLuminate is packaged 2 x 2.5 gallon containers per case.
eLuminate Floor Finish Specifications
Color: Milky emulsion
pH: 8 - 9
Non-volatile solids: 22%
Coverage: 1800 - 2200 square feet per gallon
Dry time: 30 minutes
Slip resistance: 0.5 min. by ASTM D2047
Buffability: High speed burnishing or spray buff
Detergent resistance: Excellent
VOC Content: 0.01 lbs./gal.
Storage/Stability: 1 year
Freeze/Thaw stability: Keep from freezing
EcoLogo is North America's largest, most respected environmental standard and certification mark. EcoLogo provides customers with assurance that the
products and services bearing the logo meet stringent standards of