N-Dure Advanced Floor Finish is a self cross linking polymer resin floor finish system, enhanced with nano particles of zinc oxide, providing ultimate protection in a water base clear finish.
It is an extremely durable, clear floor finish that is ideal for coating and protecting tile, wood, and stained concrete floor. Nano Floor Finish flows and levels exceptionally well on most any type of floor. Nano Floor Finish dries clear and is non yellowing - ideal for maintaining the true natural color of floors. The nano additive significantly improves leveling properties which allows the finish to be distributed uniformly - ultimately easing the application process.
- Ammonia free for dramatically reduced odor.
- Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
- Fast drying - 15 to 20 minutes under normal conditions
N-Dure is the perfect solution for floors that are NOT maintained on a regular basis or are not buffed / burnished with great frequency.
This product is an excellent choice for school classrooms, day care centers, cafeteria floors, entrances, stained concrete, and terrazzo floor.
This 20% solids styrene free floor finish is well suited for scrub and recoat programs. Daily dust mopping and damp mopping, spray buffing, and mop on restorers keep your floors looking beautiful, even after multiple recoats. This finish will not yellow and can be stripped easily with conventional floor strippers.
- Ultra durability, 20 - 25% longer life cycle than conventional floor finishes
- Tremendous scratch resistance
- Will not yellow over time
- Levels fast and evenly making it easy to apply
- For use on: Vinyl Tile, Linoleum, Terrazzo, Sealed wood, Slate, Stained Concrete
If stripping is necessary, use a high quality stripper and follow the directions accordingly. Follow with a thorough rinsing and allow floor to dry completely.
If stripping is not necessary; sweep up loose dirt and dust. Clean with Simple Blue or E-18 Scrub & Recoat cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 20 minutes before applying the next coat. Four to five coats is ideal initially, depending on the condition of the floor and desired gloss.
The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Spray buff or high speed burnish to put dazzle into its high shine, or to revitalize the finish again and again.
Low-emissions formula - meets California's new 1% VOC Regulation.
N-Dure is packaged in one gallon containers or four gallons per case. (Part #0045801)
It is also available in 2.5 gallon containers or 2 x 2.5 gal. per case. (Part # 0045825)
N-Dure Floor Finish Specifications
Color: Milky white emulsion
Drying time: 15-20 minutes
Slip resistance: .5 min by (ASTM-D2047)
Removability: With instant strippers
Coverage: 2000-2500 sq. ft./gal.
Detergent resistance: Excellent
Black mark resistance: Excellent
VOC content: 0.40 lbs./gal.
Scuff resistance: Excellent
Film Clarity: Excellent
Gloss (ASTM D 1455): 92 Min.
Storage / Stability: 1 year
Weight per gallon: 8.50 lbs./gal.
Freeze / Thaw stability: Keep from freezing
Independent testing for slip resistance by Underwriter Laboratories confirms the static coefficient of friction of N-Dure Floor Finish meets or exceeds 0.5 as determined by ASTM Method D 2047.