The LX-30 concrete grinding machine offers a mid-range grinding and polishing solution for medium to heavy duty floor preparation and restoration.
- Utilizes a heavy duty gearbox
- Medium weight design achieves rapid productivity on all surfaces
The LX-30 is a walk behind, single operator machine used to restore unfinished, old or worn concrete and terrazzo floor surfaces. Part of the heavy restoration process of the LX-30 is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone floor surfaces.
- Floating Head Design
- Stonekor ProCarb carburetor
- HD Gearbox
- Exceeds EPA and CARB standards
- Built-in vacuum port
- 11 gallon water tank
- Wet or dry operation
- Triple head planetary drive
- Best suited for jobs tackling 10,000 square feet or more
The LX-30 is one of the most versatile, user friendly machines on the market. More than just a grinder and polisher, the LX-30 is ideal for coating removal, surface preparation, floor grinding and floor polishing. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.
The LX-30 machine offers a mid-range grinding and polishing solution for medium to heavy duty floor preparation and finishing. The LX-30 utilizes a KOR MD Gearbox and medium-weight design to achieve rapid productivity on all surfaces. The LX-30 comes in a floating head design.
30" LX-30 Heavy Duty Concrete Grinder Specifications
All machines come standard with an hour meter, (3) 13" diamond discs holders (accepts pads and velcro backed diamonds discs) floating skirt, transport wheel, steel propane tank with overfill prevention device (OPD), Emissions shut-down system, engine kill switch and a two year engine warranty, 11 gallon water tank.
Production Rate: 800 - 900 square feet per hour
Grinding Width: 30 in.
Diamond Plate Holder Size: (3) 13 in. diameter
Brush Drive System: Gear drive with (3) counter rotating heads
Head Pressure: 500 lbs
Brush Speed: 840 rpm (counterclockwise)
Drum Speed: 1410 rpm
Vacuum port: 1 (2" diameter)
Clutch system: Centrifugal clutch
Chassis construction: All steel fabricated frame, Powder coat finish
Width: 30.5 in.
Length: 53 in.
Height: 42 in.
Weight: 950 pounds w/ propane tank
Engine system - Subaru / Robin 22 hp (EH65V)
- 90 degree V-twin
- Electronic ignition
- Dual element air filter
- 12 volt on-board starting system
- Low oil pressure switch
- Catalytic muffler
Fuel System: Safety propane fuel system
Starter: 12 volt with on-board battery
Oil Filter: Cartridge type full flow
Low Oil Alarm: Low pressure shutdown
Displacement: 653 cc
Fuel System: Propane
Sound Level: 87 decibels
Engine Warranty: Two year limited warranty
Shipping rates range from $300 - $450 depending on final destination
Residential deliveries may incur an additional charge of $75 - $125