X-Cel Plus is the premium low maintenance floor finish that provides gloss and durability. A fast drying ultra durable floor finish with exceptional buffability. Tests on high traffic floor produce wear levels dramatically superior to conventional floor polishes on the market today. This unique product is ready for traffic immediately after application without burnishing. After weeks of wear, it will snap back to its original beauty with the aid of a spray buff or mop on restorer.
Excellent scuff & mark resistance and protection - Maintains high appearance in a low maintenance environment.
Easy to Apply
- High gloss
- Self Leveling - Coats apply easily
- Dries rapidly - Reduces labor costs
- Non-Powdering - Finish stays intact to last longer
- Non-Yellowing - Extends stripping intervals, reducing labor cost
- Holds up under extreme conditions
- No buffing required
- Detergent resistant - Holds up to repeated mopping
- Resists scuffs - Floors look better longer
Preparation: If stripping is necessary, use a high quality floor stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary; sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow to dry completely.
Finishing: Apply a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Two or three coats are desired initially, depending on the condition of the floor and gloss desired.
Maintenance: The floor may be maintained using a quality neutral floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.
- X-Cel Plus is packaged in one gallon containers or four gallons per case
- X-Cel Plus is also available in 2.5 gallon containers, sold each or 2 per case
X-Cel Floor Finish Specifications
Color: Milky white emulsion
Type: Cosslinked acrylic
Non-volatile solids: 20%
Drying time: 30-40 Minutes
Slip resistance: .5 min by (ASTM-D2047)
Removability: With instant strippers
Coverage: 1800 - 2000 sq. ft./gal.
Detergent resistance: Excellent
Black mark resistance: Excellent
Buffability: Spray buff or Restorer
Scuff resistance: Excellent
Gloss (ASTM D 1455): 90+ specular U
Storage / Stability: 1 year
Weight per gallon: 8.62 lbs./gal.
Freeze / Thaw stability: Keep from freezing
Independent testing for slip resistance by Underwriter Laboratories confirms the static coefficient of friction of X-Cel Plus Floor Finish meets or exceeds 0.5 as determined by ASTM Method D 2047.